
RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Technician Handbook for CardJet Card Printers (continued)
Function | Description |
|
|
|
|
Card | Card Status button / LED: |
|
button and | The Card button is used to resume operation after an error condition is |
|
LED | cleared. In general, as the icon on this button indicates, errors are related to |
|
|
| |
| card feeding and printing. |
|
| • If an error occurs, the Card LED light will flash. Correct the error and |
|
| press the Card button to resume. (Note: The Card LED will also flash if |
|
| the Card Cartridge is not installed or if it has run out of cards.) |
|
| • When lit, the amber LED above this symbol will flash to indicate you |
|
| need to check the status of the Card Cartridge and/or the card being |
|
| used for the current print job. |
|
| This LED will flash when: |
|
| • The Card Cartridge is improperly installed or missing. |
|
| • The Card Cartridge is out of cards. |
|
| • A card is unable to feed from the Card Cartridge. |
|
| • A card is jammed along the Card Path. |
|
| • A non |
|
| Troubleshooting Instructions. See Section 2): |
|
| • Physically fix the card feed error conditions and press the Card button to |
|
| correctly initiate an attempt to resume the print job starting with a fresh |
|
| card. |
|
| • To replace the Card Cartridge, press the Card button on the front of the |
|
| Printer to continue printing. |
|
| • To install the Card Cartridge, press the Card button on the front of the |
|
| Printer to print or cancel printing. |
|
| (Note: If neither the Ink Cartridge nor the Card Cartridge are installed, only |
|
| the Card LED will flash at first. When the Card Cartridge is installed, the Ink |
|
| LED will then flash until the Ink Cartridge is installed. These two lights will not |
|
| flash simultaneously.) |
|
| See the Interpreting the LED Lights procedure on page 76. |
|
|
|
|
| Continued on the next page | |
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) | 43 |