RESTRICTED USE ONLYFargo Electronics, Inc.
Reviewing the Error Messages for the Magnetic Encoding Module
Mag | Problem | Solution |
Message |
|
|
|
|
|
Card Jam in | Indicates a card is jammed in the | Reposition the card under the |
Encoding | Magnetic Stripe Encoding module. | encoder’s roller and click on the |
Module |
| Retry button to try encoding |
|
| again. |
|
| OR |
|
| Click on the Cancel button to |
|
| cancel encoding. |
|
|
|
Unable to | Indicates the Magnetic Data | Click on Retry to try verifying |
Verify | encoded on the current card could | again. |
Magnetic | not be verified. | OR |
Data |
| |
| Click on Cancel to cancel | |
|
| |
|
| encoding. (Note: In most cases, |
|
| verify errors are due to a defective |
|
| magnetic stripe.) |
|
|
|
Magnetic | Indicates the data sent to the | Click Cancel and remove the card |
Data Error | Magnetic Encoder contains errors. | from the Encoding Module. |
| The current encoding job cannot be | Be sure to format the Magnetic |
| completed. | |
| Encoding data according to the | |
|
| |
|
| instructions in the Online |
|
| Operator’s Guide. |
|
|
|
Cancelled | Indicates the encoder will feed in | Remove the cancelled card from |
Card in | reverse a short distance to see if the | the Encoding Module by grasping |
Encoding | card is still in the unit. | the end of it and pulling it out. |
Module | If it is still in the unit, the card are | Be sure to separate this card from |
| ||
| moved to the Home / Error position | the cards that encoded |
| and the following message will | successfully. |
| appear: Cancelled Card in |
|
| Encoding Module |
|
| After the Cancel button is clicked, |
|
| there is a cancelled card in the |
|
| Encoding Module. |
|
|
|
|
|
| Continued on the next page |
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) | 87 |