FARGO electronic 410 manual This procedure is completed

RESTRICTED USE ONLYFargo Electronics, Inc.

Replacing the Felt Ink Well (continued)

Step Procedure

4Clean the Ink Well Tray with an alcohol pad from the Maintenance Kit, as shown below.

5Remove the backing off the new Ink Felt.

6Place the new felt in the card path. Use a paper towel to press the felt down into the card path.

7Close the Cover.

This procedure is completed.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 157