
RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Technician Handbook for CardJet Card Printers (continued)
Topic | Description | |
|
| |
Card | The Card Cartridge is used to provide | |
Quantities | card (Persona C7) quantities through the same Cartridge in both the | |
Professional Series model and the Persona Series model. | ||
Persona C7 | • Smart Tag Technology (differentiates): The Smart Tag technology | |
and 100- | ||
on the bottom of the Card Cartridge is used to differentiate between the | ||
card for | ||
| ||
Professional | ||
|
410)• Persona Series
•Professional Series
Card Path | This allows Operators to fine tune the position of the print area on the card. | |
| (Note: The orientation of the card icon is portrait due to the | |
| orientation of the Printer's Card Path.) See the Selecting the Image | |
| Position tab on page 117. | |
| The Professional 410 and Persona CardJet C7 printing systems consist of | |
| an HP Print Engine and Fargo additions that allows printing on CardJet | |
| cards | |
| For this purpose, the Printer has a special Card Path, an Input Hopper for | |
| a Card Cartridge, extra Card Sensor and a Fargo Controller (2 Boards). | |
| Troubleshooting Instructions. See Section 2): | |
| • Push on the Cancel / Retry button after removing a misfed or stuck | |
| card in the Card Path.) (Note: The slotted Optical Sensor on the Card | |
| Path is located between the Card Cartridge and the print area.) | |
| • The Print Cartridge does not center over the Card Path when the cover | |
| is opened. | |
| • The Cancel / Retry button activates when a card is hung up in the | |
| Feed Station/Card Path or it is misfed. | |
|
|
|
Card Sensor | An | |
| state in the Printer such as when a card reaches a certain location. | |
|
|
|
| Continued on the next page | |
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) | 48 |