FARGO electronic 410 manual Connecting the Card Printer to the Computer

RESTRICTED USE ONLY Fargo Electronics, Inc.

Connecting the Card Printer to the Computer

The Card Printer is designed to be used with any IBM-PC or compatible running Windows 98Se/Me/2000/XP. For best results, a Pentium™ class 233 MHz computer with 64 MB of RAM or higher and 200 MB free hard disk space is required. The Printer is equipped with a USB 1.1 high-speed interface port. This port is the means through which the Printer receives data from the computer.

IMPORTANT! You must install the Printer Driver software prior to connecting the Printer to the computer. The Printer Driver installation program will prompt you when to connect the Printer. If you have not already done so, please install the Printer Driver software at this time. See the Installing the Windows Printer Driver procedure on page 99.

To connect the Printer to the computer, obtain a USB interface cable and refer to the following steps:

Step Procedure

1Connect the smaller end of the USB cable to the Printer's USB port.

2Connect the other end of the cable to the back of the PC at an available USB port.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 26