FARGO electronic 410 manual Using the Bit Density radio buttons under Magnetic Encoding, Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Bit Density radio buttons under Magnetic Encoding

Use this option to customize the Bit Recording Density (Bits per Inch) used to encode the magnetic data on the currently selected track. The default ISO Standard selections for this option are as follows:

Step Procedure

1Select 75 BPI to change the bits per inch to 75 BPI.

OR

Select 128 BPI to change the bits per inch to 128 BPI.

OR

Select 210 BPI to change the bits per inch to 210 BPI.

Using the Character Size radio buttons under Magnetic Encoding

Use this option to customize the Character Data Size (Bits per Character) used to encode the magnetic data on the currently selected track. (Note: This character size includes the parity bit (if enabled).)

Step Procedure

1Select 5 Bits to change the bits per character to 5 BPC.

OR

Select 7 BPI to change the bits per character to 7 BPC.

OR

Select 8 BPI to change the bits per character to 8 BPC.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 124