FARGO electronic 410 manual Power button turns the Printer on and OFF. Note When lit

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers (continued)

Topic	Description
Power button /	Printer connected to the PC:
LED	• The Power button turns the Printer ON and OFF. (Note: When lit,
	the blue LED light indicates when power is ON.)
	• Press the Power button to turn the Printer ON and OFF.
	• The blue LED above the button turns OFF or ON to indicate when
	power is applied. (Note: This LED will flash when the Printer is
	processing a print job.)
	• If the Power button is pressed during a print job, the print job will be
	lost and the Printer will reset (depends on Windows configuration).
	Printer not connected to the PC:
	• Press the Power button to turn the Printer ON and OFF. (Note:
	The blue LED above the button turns OFF or ON to indicate when
	power is applied. This is the only active button when the Printer is
	not connected to the PC.)
	• All other buttons will not function and a Card Printer self-test will not
	be possible. (Note: When the Printer is not connected and the
	Card Cartridge and Ink Cartridge are not installed, only the Ink LED
	will flash as this is controlled by firmware.)
	• The Card LED will not flash in this mode when the Card Cartridge is
	not installed. (Note: The Printer must be connected to the PC for
	the Card LED to flash.)
	(Note: Avoid pressing multiple buttons simultaneously or pressing and
	holding a button or combination of buttons.)

See the description (above) for the Power button / LED.

X

CANCEL INK CARD POWER

Button LED Button / Button /

LED LED

Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 65