FARGO electronic 410 manual Interpreting LED Lights, Power Card Ink Cause / Solution

RESTRICTED USE ONLYFargo Electronics, Inc.

Interpreting LED Lights (continued)

Power	Card	Ink	Cause / Solution
LED	LED	LED
On solid	Flashing	Off	Indicates you need to check the status of the Card
			Cartridge and/or the card being used for the current
			print job. This LED will flash when:
			• The Card Cartridge is improperly installed or
			missing. Verify the Cartridge is properly installed.
			push down on the top of the Cartridge to Ensure it
			is fully seated in the Printer.
			• The Card Cartridge is out of cards. Replace the
			Card Cartridge.
			• A card is unable to feed from the Card Cartridge.
			Verify the Cartridge is properly installed. Push
			down on the top of the Cartridge to Ensure it is
			fully seated in the Printer.
			• A card is jammed specificwhere along the Card
			Path. Clear the jam.
			• A non Fargo-certified Card Cartridge is installed.
			Use only Fargo Certified Supplies.
			In any of these situations, correct the condition and
			press the Card button to continue printing.
			• If neither the Ink Cartridge nor the Card Cartridge
			are installed, only the Card LED will flash at first.
			When the Card Cartridge is installed, the Ink LED
			will then flash until the Ink Cartridge is installed.
			These two lights will not flash simultaneously.
			• If the Printer has a Magnetic Encoding Module
			installed and you are attempting to encode
			magnetic information onto a card while printing, a
			flashing Card LED can also indicate an encoding
			mis-verify or specific other type of encoding error.
			• If information is not encoded properly or encoded
			onto a bad magnetic stripe, the Printer is unable to
			verify the encoded data. When this happens, the
			Printer will signal an error on the PC screen.
			Follow the on-screen prompts to correct this error.
			Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 77