FARGO electronic 410 manual Selecting the Image Color tab, Function Description

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Image Color tab

To return all options to their factory settings, click on the Default button. Review the information below and proceed to the procedure on the next page.

Function	Description
Automatic Image	When selected, this allows the Driver to apply image enhancement
Enhancement	techniques that optimize the color and print quality of most images.
Saturation,	Allows you to control the color Saturation, Brightness and Color
Brightness, Color	Tone for the specific image.
Tone Sliders	Although the Automatic Image Enhancement generally provides the
	best color, you may wish to adjust these to optimize the specific
	image when printed.
	Click and drag on the slider to adjust. (Note: The photo above
	these options changes to show the approximate effect the
	adjustments will have on the printed image.)
Print in Grayscale	Select this option to print only in shades of gray.
Infrared Bar Codes	Select this option if you are printing bar codes which need to be
	read by an infrared bar code scanner. (Note: When this is selected,
	the black pigmented ink in the black Ink Cartridge will be applied
	where ever black appears in the image, text or bar codes. This
	allows extra drying time on the card to minimize smearing or to
	apply laminate.)
	In this mode, you may notice that drying time is slightly increased
	and that the overall image color may appear to have slightly more
	contrast. (Note: The black Ink Cartridge will only decrement when
	this option is selected.)
	Do not select this option if you are not printing bar codes or if you
	are printing bar codes which will be read by a visible-light scanner.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 112