FARGO electronic 410 manual Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printing the Test Print (after installing Ink and Card Cartridges)

Once the Ink and Card Cartridges are installed, a self-test should be performed to check for proper operation of the Printer. (Note: The self-test function also requires that the Print Driver is installed and the Printer's power and USB cables connected.)

Refer to the following to print a test print:

Step Procedure

1Open the Printer Driver's Printer Properties Window.

2Click on the Print Supplies tab. See Using the Print Supplies tab on page 129.

3Click on the Test Printer button. See Selecting the Test Printer button on page 141.

4From the Send Test window, click on the Send button to send a color test print to the Printer. See Selecting the Test Printer button on page 141. (Note: After a few seconds, the following test image will begin printing.)

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 41