FARGO electronic 410 manual Opening the Top Cover to the Card Printer

RESTRICTED USE ONLY Fargo Electronics, Inc.

Opening the Top Cover to the Card Printer

Step Procedure

1Open the Top Cover of the Printer by lifting up on its front edge and tilting the cover back into its fully open position. See CardJet Engineering Drawing R400019 in the appendix.

2To close the Top Cover, gently lower the Top Cover until it clicks into place.

IMPORTANT! Before the Ink Cartridges can be loaded into the Printer, the Printer Driver must be installed and the Printer's power and USB cables must be connected. Once this is done, the Printer's Ink Cartridge Cradle will move to the center position whenever the Top Cover is open. The Top Cover must be closed securely in order for the Printer to operate.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 27