FARGO electronic 410 manual Installation and Startup Procedures. See Section

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers (continued)

Topic	Description
Color Ink	Here is the breakdown:
Cartridge	•	CardJet 410: 300 color ink cards
	•	Persona C7: 250 color ink cards
Driver	Installation and Startup Procedures. See Section 3):
Installation	1.	Load the Driver CDROM into the PC. (Note: The host Driver
		download software automatically opens and prompts the Operator
		through the Driver installation process.)
		• The device initialization and Firmware downloading
		occurs￿when the Printer start-up is initiated.
		• The cards are printed with acceptable color reproduction and
		image placement￿when the Operator initiates a print job
		following Driver installation.
Driver Operator	Firmware traps and reports encoding error responses via required LED
interface	illumination and messages at the Driver Operator interface.
	•	Firmware correctly detects the card feed error condition and
		indicates a fatal error condition (via the Card LED) and a PC on-
		screen error message indicating a card feeding error (via the Driver
		Operator interface).
	•	Firmware correctly detects the card printing jam condition and
		indicates a fatal error condition (via the Card LED) and a PC on-
		screen error message (via the Driver Operator interface).
Empty Ink	The Printer correctly notifies the Operator of the empty Ink Cartridge via
Cartridge (1)	the Ink LED and on screen message￿before running out of ink.
(See Ink LED	The remainder of the print job is restarted when a new Cartridge is
and Error
	correctly installed.
Messages)
		Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 51