RESTRICTED USE ONLY | Fargo Electronics, Inc. |
Additional Safety Precautions for CardJet Technicians (review carefully)
Symbol | Critical Instructions for Safety purposes |
|
|
Danger: | Before operating the unit, please read the following safety |
| precautions carefully: |
| • Fire or Shock Hazard: Prevent fire or shock hazard by not |
| exposing the unit to rain or moisture. |
| • Electronic Shock: Reduce the risk of electronic shock by not |
| removing the front, top or back Panels. No |
| parts inside. (Technician Note: Refer servicing to qualified |
| service personnel.) |
| • Correct Voltage Rating: Operate the unit only on |
| 50/60 Hz. (Technician Note: If you have any doubt as to whether |
| you have a unit with the correct voltage rating for the country's |
| power supply, DO NOT attempt to use the unit. Contact the dealer |
| or the factory.) |
| • Liquid or Solid Object: Stop operation immediately if any liquid |
| or solid object should fall into the cabinet. (Technician Note: |
| Unplug the unit and have it checked by qualified service |
| personnel.) |
| • AC power cord: Use only the AC power cord included with this |
| unit or an equivalent cord. |
| • ESD procedures: Be sure to observe all established Electro- |
| Static Discharge (ESD) procedures while handling cables in or |
| near the Circuit Board. |
| • Grounding Device Safeguards: Always wear an appropriate |
| personal grounding device, such as a wrist strap with integral |
| resistor, connected to an ESD ground to avoid potential damage. |
| • Electrostatic Sensitive Device: At a minimum, make positive |
| contact with the bare metal chassis of the Printer with the hand |
| before proceeding with the procedure. (Technician Note: This |
| device is electrostatic sensitive. It may be damaged if exposed to |
| static electrical discharges. Discharges may be generated by |
| various means, such as walking on a carpeted floor.) |
|
|
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) | 74 |