FARGO electronic 410 manual Replacing the Felt Ink Well

RESTRICTED USE ONLYFargo Electronics, Inc.

Replacing the Felt Ink Well (continued)

Step Procedure

3Use the Ink Felt removal tool to firmly grasp the left corner of the Ink Felt. Remove it by pulling the Felt up and to the right, as shown below

Caution: The old Ink Felt contains wet ink and will stain anything it contacts. It is recommended that the old Ink Felt be placed in a small plastic bag and then discarded.

Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 156