FARGO electronic 410 manual Encode Only option not provided The Printer will not provide

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers (continued)

Topic	Description
Card Encoding	The Encoding module is self-contained and easily field-upgradeable by
	an Operator (or a Service Technician).
	• Encode Only option (not provided): The Printer will not provide
	an Encode Only option that allows for encoding without printing.
	• Strictly used with Fargo CardJet products: The Encoder is
	designed so it can only be used with Fargo CardJet products.
Card Error	The Firmware traps and reports the error condition via the Card LED
Recovery (See	and a corresponding message at the Driver Operator Interface￿after
Card LED)	which the print operation is halted.
	The Printer will restart the operation and will continue printing cards
	after the Operator opens the Printer Top Cover, fixes and removes the
	jammed card, closes the Printer Top Cover and presses the Card
	button.
	Troubleshooting Instructions. See Section 2):
	• Open the Printer Top Cover, fix it and remove the jammed card.
	• Close the Printer Top Cover to restart the Printer operation and
	continue printing cards.
Color Ink	Prior to the first card printing, the Ink LED begins to blink, indicating an
Cartridge out of	error. The Printer correctly detects and reports improperly loaded Card
ink	Cartridges. See the Interpreting the LED Lights procedure on page 76.
	The PC screen pop-ups displays this message: The color Ink
	Cartridge in the Printer is out of ink.
	Troubleshooting Instructions. See Section 2):
	• Replace the Cartridge and close the cover to print.
	Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 46