FARGO electronic 410 manual Technician Handbook for CardJet Card Printers, Topic Description

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers

This section is provided for Technicians at the Intermediate and Expert levels, who want to become thoroughly familiar with the Printer functions as soon as it is installed.

•From a Technician’s perspective, the CardJet Professional 410 and Persona C7 printing systems consists of an HP Print Engine and Fargo additions that allows printing on CardJet cards (CR-80, 30 mil). For this purpose, the Printer has a special Card Path, an Input Hopper for a Card Cartridge, extra Card Sensor(s) and a Fargo Controller (2 Boards). (Note: The Two models are the Professional Series CardJet 410 Card Printer/Encoder and the Persona CardJet C7 Printer/Encoder, as described on pages 5 and 6.)

•The purpose of this section is to provide Technicians with a checklist of service requirements built into the CardJet Card Printer. The Technician can review these service requirements and refer to their corresponding service procedure (as needed). The entire printing system is designed for very efficient service and maintenance by the Technician.

Topic	Description
Bad Card	The Printer correctly validates a replacement Cartridge and reports a Bad
Cartridge Tag	Card Cartridge tag via the Card LED￿before running out of cards.
Detection	The printing will continue when the Card Cartridge is replaced with a good
(See Card
	Cartridge.
LED)
Black Ink	The Black Ink Cartridge provides enough ink for a minimum of 900 cards.
Cartridge	• CardJet 410: 900 card minimum
	• Persona C7: 750 card minimum
	Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 42