FARGO electronic 410 manual Technician Review of Printer Features, Function Description

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Review of Printer Features

See the next page. Refer to the Technician Handbook for CardJet Card Printers in this section.

Function	Description
Top Cover	Opens to allow access to the Ink Cartridges and Card Path. This cover must
	be closed in order for the Printer to begin printing. See Opening the Top
	Cover to the Card Printer on page 27. See CardJet Engineering Drawing
	R400019 in the appendix.
Ink	Holds the Ink Cartridges and moves them back and forth across the card
Cartridge	during printing. (Note: Before Ink Cartridges can be loaded into the Printer,
Cradle	the Printer Driver must be installed and the Printer's Power and USB cables
	must be connected.)
	Once this is done, the Printer's Ink Cartridge Cradle will move to the center
	position whenever the Top Cover is open.
Card	Catches printed cards as they eject from the Printer. This Hopper will hold a
Output	maximum of 50 cards. The Card Output Hopper Door can be either opened
Hopper	or closed while printing, but If you would like printed cards to stack neatly,
	leave the door closed, as shown below. (Note: An external Card Output
	Hopper is provided if the Printer model includes the Magnetic Stripe
	Encoding Module.)

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 12