FARGO electronic 410 manual Loading the Card Cartridge

RESTRICTED USE ONLYFargo Electronics, Inc.

Loading the Card Cartridge (continued)

Step Procedure

3Set the Card Cartridge onto the Card Input Hopper with the arrow on the top of the Cartridge pointing toward the front of the Printer as shown below. Push the Card Cartridge down until it clicks into place. See the next two pages. (Note:

When installed properly, the Card LED light will turn off to signal that the Card Cartridge is ready for printing.)

Caution: When not in use, keep the Card Cartridge in place to prevent dust from accumulating on the Drive Rollers.

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 40