RESTRICTED USE ONLY

Fargo Electronics, Inc.

Section 2: Troubleshooting Guidelines

The purpose of this section is to provide Technicians with a breakdown of the CardJet Card Printers Troubleshooting and Printer Maintenance requirements.

Safety Messages (review carefully)

Symbol

Critical Instructions for Safety purposes

 

 

Danger:

Failure to follow these installation guidelines can result in death or

 

serious injury.

 

Information that raises potential safety issues is indicated by a warning

 

symbol (as shown to the below).

 

To prevent personal injury, refer to the following safety messages

 

before performing an operation preceded by this symbol.

 

To prevent personal injury, always remove the power cord prior to

 

performing repair procedures, unless otherwise specified.

 

To prevent personal injury, Ensure only qualified personnel perform

 

these procedures.

 

 

Caution:

This device is electrostatically sensitive. It can be damaged if

 

exposed to static electricity discharges.

 

Information that raises potential electrostatic safety issues is indicated by a

 

warning symbol (as shown to the below).

 

To prevent equipment or media damage, refer to the following safety

 

messages before performing an operation preceded by this symbol.

 

To prevent equipment or media damage, observe all established

 

Electrostatic Discharge (ESD) procedures while handling cables in or

 

near the Circuit Board and Printhead Assemblies.

 

To prevent equipment or media damage, always wear an appropriate

 

personal grounding device (e.g., a high quality wrist strap grounded to

 

avoid potential damage).

 

To prevent equipment or media damage, always remove the Ribbon

 

and Cards from the Printer before making any repairs, unless otherwise

 

specified.

 

To prevent equipment or media damage, take jewelry off of fingers

 

and hands, as well as thoroughly clean hands to remove oil and debris

 

before working on the Printer.

 

 

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0)

73

Page 73
Image 73
FARGO electronic 410 These procedures, Near the Circuit Board and Printhead Assemblies, Avoid potential damage, Specified