FARGO electronic 410 manual Technician Handbook for CardJet Card Printers

RESTRICTED USE ONLY Fargo Electronics, Inc.

Technician Handbook for CardJet Card Printers (continued)

Topic	Description
InkJet Illegal Ink	The Printer correctly validates the replacement Cartridge and reports
Cartridge	that it is illegal via the Ink LED￿before running out of ink and having a
Detection (See	new Ink Cartridge installed. The printing is restarted when the Ink
Ink LED)	Cartridge is replaced with a good Cartridge.
Input Hopper	The Printer has a special Card Path, an Input Hopper for a Card
	Cartridge, extra Card Sensor and a Fargo Controller (2 Boards). This
	Printer area stores the blank cards, ready to print.
Installing Ink	The Printer correctly notifies the Operator of the empty Ink Cartridge via
Cartridge	the Ink LED￿before running out of ink. The remainder of the print job is
Detection (See	restarted when a new Cartridge is correctly installed.
Ink LED)
Interchangeable	Both Printers primarily uses customized CardJet parts to ensure
Commercial	interchangeability and to simplify the problem of field stocking of
parts	replacement parts.
Interface to the	The Printer is equipped with USB interface.
PC	• Technicians can access the Printer Driver Operator Interface
	window by selecting Start button > Settings > Printers > CardJet
	410 Card Printer (right click) > Printing Preferences to bring up the
	CardJet 410 or Persona C7 Card Printer Printing Preferences
	window.
	• Technicians can use the Card, Image Quality, Image Position,
	Magnetic Encoding and Print Supplies tabs to make appropriate
	selections, as described below and (in more detail) in Section 3:
	Printer Adjustments.
	Continued on the next page

CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 5.0) 59