Dell NM176 Auto default, Auto automatically chooses an emulation type, Boot Sequence Retry

Table 2-2. System Setup Program Options (continued)

Option	Description
USB Flash Drive	Determines the emulation type for a USB flash drive.
Emulation Type	Floppy allows the USB flash drive to act as a removable
(Auto default)	floppy disk, and it will be assigned a drive letter of A: or B:.
	Hard disk allows the USB flash drive to act as a hard drive.
	Auto automatically chooses an emulation type.
Boot Sequence Retry	Enables or disables retrying the boot sequence that was
(Disabled default)	specified in the Boot Sequence option.
Integrated Devices	See "Integrated Devices Screen" on page 41.
PCI IRQ Assignment	Displays a screen to change the IRQ assigned to each of the
	integrated devices on the PCI bus, and any installed
	expansion cards that require an IRQ.
Console Redirection	See "Console Redirection Screen" on page 42.
System Security	Displays a screen to configure the system password and
	setup password features. See "Using the System Password"
	on page 45 and "Using the Setup Password" on page 48 for
	more information.
Keyboard NumLock	Determines whether your system starts up with the
(On default)	NumLock mode activated on 101– or 102–key keyboards
	(does not apply to 84-key keyboards).
Report Keyboard Errors	Enables or disables reporting of keyboard errors during the
(Report default)	POST. Enable this option for host systems that have
	keyboards attached. Select Do Not Report to suppress all
	error messages relating to the keyboard or keyboard
	controller during POST. This setting does not affect the
	operation of the keyboard itself if a keyboard is attached to
	the system.

38

Using the System Setup Program