Dell NM176 owner manual Installing the Control Panel Assembly, Assembly Mounting holes

Figure 3-20. Installing and Removing the Control Panel Assembly

12

3

4

1	control panel	2	screws (2)	3	cables
	assembly
4	mounting holes (2)

Installing the Control Panel Assembly

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Align the control panel assembly’s mounting holes with the chassis mounting holes. See Figure 3-20.

2Using a #2 Phillips screwdriver, install the two screws that secure the control panel assembly to the chassis. See Figure 3-20.

90

Installing System Components