For additional information on using BMC, see the documentation for the BMC and systems management applications.

Entering the BMC Setup Module

1Turn on or restart your system.

2Press <Ctrl-E> when prompted after POST.

If your operating system begins to load before you press <Crtl-E>, allow the system to finish booting, and then restart your system and try again.

BMC Setup Module Options

For information about the BMC Setup Module options and how to configure the emergency management port (EMP), see the BMC User’s Guide.

50

Using the System Setup Program

Page 50
Image 50
Dell NM176 owner manual Entering the BMC Setup Module, BMC Setup Module Options