Dell NM176 owner manual Console Redirection Screen

Table 2-6. Integrated Devices Screen Options (continued)

Option	Description
Serial Port 1	Serial Port options are COM1, COM3, BMC Serial,
(COM1 default)	BMC NIC, COM1/BMC, and Off. If an optional remote
	access controller (RAC) is installed in the system, RAC is
	an additional option.
	Serial Port shares three usage models. For standard usage,
	Serial Port attempts to use COM1 first, and then COM3.
	For BMC usage, serial port 1 uses the COM1 address and
	communication can be either via the serial port or the
	integrated shared NIC. RAC control uses only the COM1
	address.
	The COM1/BMC setting allows you to toggle the system
	between a COM1 setting and BMC Serial setting. In this
	mode, press <ESC> to enter the BMC Serial setting and
	press <ESC><q> to return to the COM1 setting.
	Off and COM3 are not available options when Console
	Redirection is set to use Serial Port 1.
Speaker	Enables or disables the system internal speaker.
(On default)

Console Redirection Screen

Table 2-7 lists the options and descriptions for the information fields that appear on the Console Redirection screen.

Table 2-7. Console Redirection Screen Options

Option	Description
Console Redirection	Sets the console redirection feature to Off or Serial Port 1.
(Off default)
Failsafe Baud Rate	Displays if the failsafe baud rate is used for console
(115200 default)	redirection.
Remote Terminal Type	Select either VT 100/VT 220 or ANSI.
(VT 100/VT 220 default)
Redirection After Boot	Enables or disables console redirection after your system
(Enabled default)	restarts.

42

Using the System Setup Program