<STATUS DISPLAY>
STATUS DISPLAY :ON
1080/1035 :1080
EXIT:
MENU
ADJUST:- + SELECT:
<DISTORTION ADJ.>
PINCUSHION :00
PIN.BALANCE :00
PARALLELOGRAM :00
TRAPEZOID :00
sub menu
reset
EXIT:
MENU
ADJUST:- + SELECT:
Compensates the picture
distortion. Press the button
to display the setting menu
illustrated on the right.
Item :PINCUSHION
Adjustment
range :–20 ~ 00 ~ +20
Function :Compensates pincushion picture distortion.
– : Expands both left and right sides of the
picture.
+ : Squeezes both left and right sides of the
picture.
Item :PIN.BALANCE
Adjustment
range :–20 ~ 00 ~ +20
Function :Adjusts the compensation balance of the
pincushion picture distortion.
–:The picture is expanded on the left side, and
squeezed on the right side.
+ :The picture is squeezed on the left side, and
expanded on the right side.
Item :PARALLELOGRAM
Adjustment
range :–20 ~ 00 ~ +20
Function :Compensates parallelogram picture
distortion.
–:Moves the upper side of the picture to the
right, and the lower side to the left.
+ : Moves the upper side of the picture to the left,
and the lower side to the right.
Item :TRAPEZOID
Adjustment
range :–20 ~ 00 ~ +20
Function :Compensates trapezoid picture distortion.
–: Enlarges the upper side of the picture.
+ : Reduces the upper side of the picture.
Item :sub menu
Adjustment range/
Settings : Same as PINCUSHION, PIN.BALANCE,
PARALLELOGRAM and TRAPEZOID.
Function :Performs PINCUSHION, PIN.BALANCE,
PARALLELOGRAM or TRAPEZOID settings in a
single-line display. The sub menu display varies
depending on the selected item.
Item :reset
Function :Sets the PINCUSHION, PIN.BALANCE,
PARALLELOGRAM and TRAPEZOID values to
factory-preset ones.
6. STATUS DISPLAYMakes the status of the input
signal appear or disappear on
the screen. Press the
button to display the setting
menu illustrated on the right.
Item :STATUS DISPLAY
Settings : ON/OFF
Function :Makes the format name appear or disappear
when signals are input and the signal status
appear or disappear when the input signal is
changed.
ON :The information is displayed.
OFF: The information is not displayed.
Item :1080/1035
Settings : 1080/1035
Function :Makes the number of effective scanning lines
appear or disappear when the HDTV signal is
input.
1080 : Sets the number to 1080. (Select when
the digital HDTV signal is input.)
1035 : Sets the number to 1035. (Select when
the analogue HDTV signal is input.)
7. CONTROL LOCKItem : CONTROL LOCK
Settings :OFF/ON
Function : Invalidates most of operations on the front panel
(including menu screen operations).
OFF: Enables normal operations.
ON :Invalidates all operations except the power
switch and CONTROL LOCK.
NOTE: While CONTROL LOCK is set to ON, attempting to
perform any operation except power switch and
CONTROL LOCK causes the “ Control lock on!”
warning to appear on the screen for approx. 3
seconds. (It is possible to operate the power switch
and display SETUP MENU.)
When SETUP MENU is displayed while CONTROL
LOCK is set to ON, the cursor (
4
) is located next to
CONTROL LOCK and cannot be moved.
8. all resetFunction : Sets all items in SETUP MENU to factory-preset
values.
16