Main Menu (continued)

g WB adjustment mode

You can adjust “WHITE BALANCE VAR1” – “WHITE BALANCE VAR3” (WB) by selecting “VAR1” – “VAR3” in “COLOR TEMP.” in the “VIDEO CONFIG” menu.

The underlined values are factory preset setting values.

Sub menu

Settings

Explanation

 

 

 

 

COLOR TEMP.

<USER0–63>

Used to select the color temperature that will become the

 

<D93>

basis for adjustments.

 

<D65>

<USER0–63>

Adjustable settings 0–63 (color

 

<D56>

 

 

temperature around 3000K–9300K)

 

 

<D93>

Color temperature around 9300K

 

 

<D65>

Color temperature around 6500K

 

 

<D56>

Color temperature around 5600K

WB-HIGH RED

<0–60>

Used to adjust the WB in the HIGH level R component.*1

 

(Factory preset settings: 30)

 

WB-HIGH GREEN

Used to adjust the WB in the HIGH level G component.*1

WB-HIGH BLUE

 

Used to adjust the WB in the HIGH level B component.*1

WB-LOW RED

 

Used to adjust the WB in the LOW level R component.*1

WB-LOW GREEN

 

Used to adjust the WB in the LOW level G component.*1

WB-LOW BLUE

 

Used to adjust the WB in the LOW level B component.*1

RESET

 

This returns the “WB-HIGH RED” – “WB-LOW BLUE”

 

 

settings to the factory presets.

 

 

 

 

 

*1 When adjusting, the item display moves to the lower part of the screen.

ENGLISH

SYSTEM CONFIG

 

 

The underlined values are factory preset setting values.

 

 

 

Sub menu

Settings

Explanation

 

 

 

BACKLIGHT

< 0–60 >

Used to adjust the brightness of the liquid crystal backlight.

 

 

 

FUNCTION1

<HV DELAY>

Used to select the functions assigned to [FUNCTION1] and

 

<AUTOSETUP>

[FUNCTION2] (front buttons).

 

<BLUE ONLY>

<HV DELAY>*2

 

<GAMMA

Displays the synchronizing signal (horizontal, vertical).

 

SELECT>

 

The display is switched in the following order.

 

<SD ASPECT>

 

<SCAN>

OFF J H-Delay J V-Delay J HV-Delay J OFF

 

<SUB

<AUTOSETUP>*5

 

WINDOW>

Used to automatically adjust the PC display.

 

<UNDEF>

<BLUE ONLY>

 

 

FUNCTION2

<HV DELAY>

Used to cut the red and green signals. You can check the hue (PHASE)

 

<AUTOSETUP>

and depth of color (CHROMA). This is switched between ON/OFF by

 

<BLUE ONLY>

pushing the button.

 

<GAMMA

<GAMMA SELECT>

 

SELECT>

You can switch between “NORMAL” and “FILM”. *3*4

 

<SD ASPECT>

<SD ASPECT>

 

<SCAN>

 

Used to switch between “16:9” and “4:3”. *3*4

 

<SUB

 

WINDOW>

<SCAN>

 

<UNDEF>

You can switch between “UNDER” and “NORMAL”. *3*4

 

 

<SUB WINDOW>

 

 

You can perform the settings for 2 screen display mode. *3*4*6

 

 

<UNDEF>

 

 

No settings

 

 

 

*2 This function is disabled while in 2 screen display mode.

*3 These functions are disabled when the control settings are in GPI mode.

*4 If these settings are changed, the menu settings will also change.

*5 When “RGB-COMP.” is not selected in “YPBPR/RGB” in the “INPUT SELECT” menu, “NOT RGB-COMP.CH-” is displayed, and this does not operate.

*6 This function will not work when “RGB-COMP.” is selected in “YPBPR/RGB” in the “INPUT SELECT” menu.

E-16