Panasonic BT-LH1700WE manual 8

Controls and Their Functions (continued)

Rear panel

1 2 3 4 5

		6	7	8
SDI (HD/SD) terminal (BNC)
IN1	: This is the SDI input terminal (compatible with HD/SD automatic switching).
IN2	: This is the SDI input terminal (compatible with HD/SD automatic switching).
SWITCHED OUT	: This is the active through-out terminal for the SDI input signal being displayed on the screen.

*SDI active through-out is only outputted when [SDI1] or [SDI2] is selected using the [INPUT SELECT] buttons. It is not outputted when anything other than SDI is selected.

VIDEO terminal (BNC)

IN	: This is the VIDEO signal (composite signal) input terminal.
OUT	: This is the input signal through-out terminal.
Y/C terminal
IN	: This is the Y/C signal (S-video signal) input terminal.
OUT	: This is the input signal through-out terminal.

YPBPR/RGB terminal (BNC)

IN	: This is the YPBPR/RGB signal input terminal.
OUT	: This is the input signal through-out terminal.

*When using the RGB signal, you can also connect the external synchronizing signal to the SYNC/HD terminal. When using a PC RGB signal, connect the horizontal synchronizing signal to the SYNC/HD terminal, and the vertical synchronizing signal to the VD terminal.

VD IN input terminal

This is the vertical synchronizing signal (VD) input terminal used when connecting to a PC RGB signal.

AUDIO input terminal (Pin terminal)

This is the common audio input terminal for all video input terminals.

*When an embedded audio unit BT-YAE1700G (optional) is attached, SDI input audio is automatically selected by selecting [SDI1] or [SDI2] with [INPUT SELECT].

GPI input terminal (D-SUB 9-pin)

External control is possible by using a GPI signal.

RS232C input terminal (D-SUB 9-pin)

External control is possible by using a RS232C signal.

E-7