Maintenance Inspections

Maintenance inspections are necessary for the user to use this equipment safely. It is important to keep monitor functions in good condition at all times through periodical and appropriate maintenance. In order to use this monitor for a long time, and to make full use of all of its functions, be sure to carry out the following maintenance inspections.

1.Necessity of periodical maintenance services

A backlight is used in the liquid crystal panel. This part (consumable) deteriorates as time passes, and can cause performance levels to drop, or may cause a malfunction.

Therefore, in addition to the after-service repairs performed if a malfunction occurs, it is essential that general servicing and maintenance servicing are conducted on a regular basis, to prevent malfunctions and accidents caused by the deterioration of consumable parts, and to keep the monitor working normally.

2.Standard maintenance time guidelines and items to be performed

The following maintenance performance times give standard guidelines for when to perform maintenance, and do not indicate the individual lifespan of your equipment. Also, note that the deterioration time varies depending on the usage environment and way in which the equipment is used.

Part name

Quantity

Periodic maintenance

inspection time

 

 

 

 

 

Backlight

 

Replace every 50,000

and liquid

1

hours*

crystal panel

 

 

Fan

1

Replace every 10,000

 

hours

 

 

 

 

 

* You cannot replace just the backlight unit on its own.

Specifications

gGeneral Input power

 

 

 

 

 

 

 

 

Power supply:

Power consumption:

 

 

AC:

100 V – 240 V, 50/60 Hz

1.1

A – 0.6 A

 

 

DC:

12 V (11 V – 17 V)

4.5

A

 

 

 

 

 

 

 

 

 

 

 

 

 

is the safety infomation.

Dimensions:

•Including stand

430 (W) mm x 323.5 (H) mm x 198 (D) mm

•Main body only, not including stand 430 (W) mm x 309 (H) mm x 81.1 (D) mm

Weight:

•Including stand

8.1kg

•Main body only, not including stand

7.2kg

Operating temperature:

+5 °C to +35 °C

Operating humidity:

20 % to 80 % (no condensation) Storage temperature:

-20 °C to +60 °C

g Panel

 

Size:

17.1 type

Aspect ratio:

15:9

Number of pixels:

1280 x 768 (WXGA)

Display colors:

Approx. 16,700,000 colors

View angle:

176° up/down, 176° right/left

g Input Connectors Image signal input:

VIDEO:

1 line, BNC x 2

(1 connector with through-out configuration) Y/C:

1 line, Y/C connector x 2

(1 connector with through-out configuration) Analog component:

1 line for YPBPR/RGBS, BNC x 8

(4 connectors with through-out configuration) However, when input is RGB-COMP. this becomes BNC x 5 (R, G, B, HD, and VD).

(Through-out is not available) SDI:

2 line, BNC x 3

(1 connector with switched-out configuration)

Audio input:

Pin jack x 2 (stereo)

GPI:

D-SUB, 9 pins x 1

RS-232C:

D-SUB, 9 pins x 1

DC input:

XLR, 4 pins x 1

g Signal level

 

 

VIDEO

 

 

EXT SYNC signal level:

0.3

Vp-p to 4.0 Vp-p

HD/VD signal level:

TTL level

AUDIO

 

 

AUDIO input level:

0.5

Vrms

Speaker output:

0.5

W + 0.5 W

E-27