Panasonic BT-LT900A manual Input Select

MAIN MENU

INPUT SELECT

Item	Setting	Description
SDI1 *1	OFF	For setting whether the SDI 1 signals can
	ON	be selected when the channels are to be
		switched using the INPUT button.
		OFF: The SDI 1 signals cannot be selected.
		ON: The SDI 1 signals can be selected.
FORMAT	AUTO	For selecting the signals whose input is to
	1080/60I	be accepted at the SDI 1 connector.
	1080/50I	AUTO:
	1080/30P	All supported signals are accepted.
	1080/25P	1080/60I:
	1080/24P	1080/60I or 1080/59.94I format signals
	1080/24PsF	are accepted.
	1035/60I	1080/50I:
	720/60P	1080/50I format signals are accepted.
	720/60P	1080/30P:
	ANAMO	1080/30P or 1080/29.97P format signals
	576/50I	are accepted.
	480/60I	1080/25P:
		1080/25P format signals are accepted.
		1080/24P:
		1080/24P or 1080/23.98P format signals
		are accepted.
		1080/24PsF:
		1080/24psF or 1080/23.98psF format
		signals are accepted.
		1035/60I:
		1035/60I or 1035/59.94I format signals
		are accepted.
		720/60P:
		720/60P or 720/59.94P format signals
		are accepted.
		720/60P ANAMO:
		720/60P or 720/59.94P format signals
		which support an anamorphic lens are
		accepted.
		576/50I:
		576/50I format signals are accepted.
		480/60I:
		480/59.94I format signals are accepted.

Item	Setting	Description
SDI2 *1	OFF	For setting whether the SDI 2 signals can
	ON	be selected when the channels are to be
		switched using the INPUT button.
		OFF: The SDI 2 signals cannot be selected.
		ON: The SDI 2 signals can be selected.
FORMAT	AUTO	For selecting the signals whose input is to
	1080/60I	be accepted at the SDI 2 connector.
	1080/50I	The setting selection is the same as for the
	1080/30P	SDI 1 FORMAT item.
	1080/25P
	1080/24P
	1080/24PsF
	1035/60I
	720/60P
	720/60P
	ANAMO
	576/50I
	480/60I
VIDEO *1	OFF	For setting whether the VIDEO signals can
	ON	be selected when the channels are to be
		switched using the INPUT button.
		OFF: The VIDEO signals cannot be selected.
		ON: The VIDEO signals can be selected.
FORMAT	AUTO	For selecting the signals whose input is to
	NTSC	be accepted at the VIDEO connector.
	PAL	AUTO:
		All supported signals are accepted.
		NTSC:
		NTSC signals are accepted.
		PAL:
		PAL signals are accepted.
YPBPR *1	OFF	For setting whether the YPBPR/RGB
	ON	signals can be selected when the channels
		are to be switched using the INPUT button.
		OFF: The YPBPR/RGB signals cannot be
		selected.
		ON: The YPBPR/RGB signals can be
		selected.
MODE	YPBPR	For switching between the YPBPR and
	RGB	RGB analog signals.
		YPBPR:
		The analog signals are switched to
		Y/Pb/Pr.
		RGB:
		The analog signals are switched to RGB.

*1 Up to three of these items can be set to OFF at the same time. Once the three items have been set to OFF, it is no longer possible to set a fourth item to OFF. It is not possible to set all the inputs to OFF.

The underlined setting indicates the factory setting mode.

20