MAIN MENU
INPUT SELECT
Item | Setting | Description |
|
|
|
FORMAT | AUTO | For selecting the signals whose input is to |
| 1080/60I | be accepted in the YPBPR mode and in the |
| 1080/50I | RGB mode. |
| 1080/30P | The signals can be set for each mode, and |
| 1080/25P | when the MODE item setting is switched |
| 1080/24P | from YPBPR to RGB or vice versa, the |
| 1080/24PsF | mode is automatically switched so that the |
| 1035/60I | signal format which has been set for the |
| 720/60P | mode now set is accepted. |
| 576/50I | AUTO: |
| 480/60P | All supported signals are accepted. |
| 480/60I | 1080/60I: |
|
| 1080/60I or 1080/59.94I format signals |
|
| are accepted. |
|
| 1080/50I: |
|
| 1080/50I format signals are accepted. |
|
| 1080/30P: |
|
| 1080/30P or 1080/29.97P format signals |
|
| are accepted. (This setting takes effect |
|
| only when YPBPR is selected.) |
|
| 1080/25P: |
|
| 1080/25P format signals are accepted. |
|
| (This setting takes effect only when |
|
| YPBPR is selected.) |
|
| 1080/24P: |
|
| 1080/24P or 1080/23.98P format signals |
|
| are accepted. (This setting takes effect |
|
| only when YPBPR is selected.) |
|
| 1080/24PsF: |
|
| 1080/24psF or 1080/23.98psF format |
|
| signals are accepted. (This setting takes |
|
| effect only when YPBPR is selected.) |
|
| 1035/60I: |
|
| 1035/60I or 1035/59.94I format signals |
|
| are accepted. (This setting takes effect |
|
| only when YPBPR is selected.) |
|
| 720/60P: |
|
| 720/60P or 720/59.94P format signals |
|
| are accepted. |
|
| 576/50I: |
|
| 576/50I format signals are accepted. |
|
| 480/60P: |
|
| 480/60P format signals are accepted. |
|
| 480/60I: |
|
| 480/59.94I format signals are accepted. |
|
|
|
COMPONENT | SMPTE | For selecting the input level of the Y/Pb/Pr |
LEVEL | B75 | signals. |
|
| SMPTE: This is selected when the signals |
|
| are to be output from an MII VTR. |
|
| B75: This is selected when the signals |
|
| are to be output from a Betacam |
|
| VTR. |
|
|
|
| For switching the connector where the sync | |
| EXT | signal is to be accepted. |
|
| |
|
| signal has been superimposed onto |
|
| the G signal. |
|
| EXT: The sync signal is accepted at the |
|
| SYNC connector among the analog |
|
| component/RGBS connectors. |
|
|
|
CONTROL
Item | Setting |
| Description |
| |
|
|
| |||
CONTROL | LOCAL | For selecting where the operations are to | |||
| REMOTE | be initiated. |
|
| |
|
| LOCAL: Only operations initiated from the | |||
|
|
| main controls can be performed. | ||
|
|
| Remote control operations cannot | ||
|
|
| be performed. |
| |
|
| REMOTE: Remote control operations can be | |||
|
|
| performed, | but no | operations |
|
|
| initiated by the main controls can | ||
|
|
| be performed although there are a | ||
|
|
| few exceptions to this. |
| |
|
| <Notes> |
|
| |
|
| ≥ When REMOTE has been selected, the | |||
|
| “ | ” lock mark appears on the status | ||
|
| display. |
|
| |
|
| ≥ When REMOTE has been selected, only | |||
|
| the settings of the CONTROL item and | |||
|
| LOCALENABLE item on the CONTROL | |||
|
| screen can be changed as menu | |||
|
| operations. |
|
| |
|
|
| |||
LOCALENABLE | DIS. | For selecting whether to enable the input to | |||
| INPUT | be switched to the main controls when | |||
|
| REMOTE has been selected. |
| ||
|
| DIS: When REMOTE has been selected, | |||
|
|
| the input can no longer be switched | ||
|
|
| to the main controls. |
| |
|
| INPUT:Even when | REMOTE | has been | |
|
|
| selected, the input can be switched | ||
|
|
| to the main controls. |
| |
|
|
| |||
BACKLIGHT TIME |
| For displaying the total operation time of | |||
|
| the backlight. |
|
| |
|
|
|
|
|
|
The underlined setting indicates the factory setting mode.
21
