11
Getting Started
6Press [Finish].
7Input the correct date, time and time zone and press [Close]. You can also complete
these settings at a later time.
8Setup Windows
Moving the cursor ( ) or clicking buttons can be performed with the touch pad ( page 15).
Windows 98
1Select settings for your region and your keyboard layout, then press [Next].
(for U.S.A.: United States 101)
2Enter your name, then press [Next].
3Select [Skip] at the [Using Your Modem to Connect].
4Select [Yes] at the [Cancel Dialing], then press [Next].
The License Agreement will be displayed.
5After reading the agreement, select [I accept this agreement] or [I do not accept the
agreement], then press [Next].
If [I do not accept the agreement] is selected, the Windows setup will be aborted.
<During the setup procedure after reinstalling only>
After accepting the agreement, the [Windows product key] is displayed.
Input the Product Key written down in the "Customer's Record" section, then
press [Next]. ( page 9 step 2 )
NOTE
2Select [Next].
3Input your name and organization, then select [Next]. (It is possible to omit the orga-
nization item.)
4Input your computer name and select [Next].
5Input an Administrator password and select [Next].
6Select [Finish].
7Following the display, press Ctrl + Alt + Del . Input the password set in step
5 and select [OK], then select [Close] at the [Welcome] display.
As the computer starts up, it will be necessary to input the password set in step 5 .
(To next page)
If [I dont accept this Agreement] is selected, the Windows setup will be aborted.
NOTE
CAUTION
Remember this password! If the password is forgotten, Windows NT cannot be
operated.
Windows NT
1The Software License Agreement will be displayed. After reading the agreement, se-
lect [I accept this Agreement].