10
Set the computer’s parameters for wireless LAN functions and TCP/IP.
Set Network Type, SSID, WEP Encryption, IP Address, and NetMask according to the
above screen. (In the above settings, Network Type is shown as “AdHoc” in some cases,
while a term such as “Peer-to-Peer Group” is used here.)
5Select [Connect] on <Wireless display screen> of step 4 .
First-time Operation<Wireless display screen>
Change setting on host PC to the following
value, reboot the host PC, then select
"Connect" below.
Connect Cancel
Wireless LAN card
Network Type : AdHoc
SSID : cfvdw07-xxxxx
WEP Encryption : disable
TCP/IP Class A Class B Class C
IP Address : 10.57.148.205
NetMask : 255.0.0.0
MeiWDS
AES Encryption : disable
Password : wdsp
(This screen is a sample.)
AES: Advanced Encryption Standard
4The following screen should appear.