24
Setting the Wireless Display

Option Menu

By selecting [Option], you can establish the individual settings for the wireless display.
General Wireless Battery Option Version
100% Excellent OK Cancel
Default settings
Change the password that is input to
run the wireless display.
Set the resume function to [Normal
resume] or [Quick resume], then se-
lect [OK].
Normal resume:
The wireless connection is dis-
abled during display off.
Quick resume:
Only the screen is turned off dur-
ing display off.
If there is no input from the
touchscreen or button for a certain in-
terval of time, the display may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
Wireless Connection : Setup
Power on Password : Change
Supervisor Password : Change
Touchscreen : Calibration
LCD Off Timer : 30 min
LCD Off Mode : Normal resume
Power Off Timer : disable
Change the Supervisor
Password.
Change the settings of the wireless
connection in the following proce-
dure.
1Select [Setup].
<If the Supervisor Password has been set>
Enter the Supervisor Password, then
select [OK].
2Select the profile that has been set
on the following screen, then se-
lect [Enter].
3Set by the same procedure as 2 ,
3 , and 4 of “Setup the Wireless
Display” ( page 9).
<Wireless display screen>
Select profile.
Profile 1 Profile 2
Profile 3 Profile 4
If there is no input from the
touchscreen or button for a certain in-
terval of time, the power may be
turned off.
Set the interval of time to [30 sec],
[1 min], [2 min], [5 min], [10 min],
[20 min], [30 min] or [disable], then
select [OK].
(This screen is a sample.)