28
1Select [MeiWDS Setup Utility] in the following proce-
dure.
[start] - [All Programs] - [Panasonic]
2Enter the Supervisor Password.
In the default setting, the Supervisor Password is set to
“supervisor”.
3Set the password and AES Encryption settings.
If the setting between the computer and wireless dis-
play doesn’t confirm (e.g., the display has changed to
another one.), set it again in the following procedure.
Set AES Key Length.
<When setting AES Encryption to something other than
[Disable]>
Select [AES Key], and set the AES Key(s) using phrase
or binary, then select [OK].
Set AES Key Lifetime.
4At the confirmation screen, select [Finish].
The wireless display settings cannot be set at the same
time as those of MeiWDS.
Set the AES Key setting after setting the wireless dis-
play. ( page 26)
When selecting on the taskbar, the menu is dis-
played.
[Password] and [Exit MeiWDS] are enabled when
adding the check mark for [Enable tray menu] in the
MeiWDS Setup Utility.
·Password : Set the same password as that is
set in [Password] of the MeiWDS
on [Wireless Display Setup Util-
ity] screen.
·About MeiWDS: The software version and copy-
right are displayed.
·Exit MeiWDS : Exit the program.
NOTE

MeiWDS Setup Utility

Changing the Wireless Display Settings