Mini Port Replicator
Connector
ENGLISH

Connecting

1 Turn the computer off.

Do not connect the Mini Port Replicator
in sleep (Windows XP: standby) or hiber-
nation mode.
2 Connect the Mini Port Replicator to the
connector of the computer with "This side
up" facing upwards.

Disconnecting

1 Turn the computer off.

Do not disconnect the Mini Port Replicator in
sleep (Windows XP: standby) or hibernation
mode.

2 While pushing the Mini Port Replicator's

lock button, pull the Mini Port Replicator out
straight.
You cannot use the LAN port or the external display port on the computer when the
Mini Port Replicator is connected to the computer. Connect the LAN cable or the
external display cable to the ports on the Mini Port Replicator.
There may be noise on some external displays connected to the Mini Port Replicator.
In this case, connect the AC adaptor to the DC-IN Jack of the computer.
If devices connected to USB ports (2a, 2b, 2c) does not operate:
· In the case of devices with consumption voltage exceeding 100 mA, or devices for
which the consumption voltage cannot be confi rmed, connect via USB port 1 or
the computer’s USB port.
<Only for Windows XP>
· Try disabling the power saving function on the USB 2.0 Root Hub. For informa-
tion about enabling/disabling the power saving function, refer to the computer’s
Reference Manual
.
When you use the computer that [USB Port] is displayed in [Advanced] menu of the
Setup Utility, confi rm that [USB Port] is set to [Enable].
For more information about the settings and preparations of the peripheral devices,
refer to the peripheral devices' own operating instructions.
CAUTION
(For information about the position of the Mini Port Replicator
connector, refer to the computer’s Operating Instructions.)