9-20

n Assembly of the Pad PCB and SW PCB

n Putting of the TP Bottom Tape

9.2.8. Setting the left LED PCB and right LED PCB

1. Connect the Cable to the Connector. (CN806)

2. Fix the left LED PCB.

3. Connect the Cable to the Connector. (CN801)

4. Fix the right LED PCB.

5. Attach the two Release Papers.

6. Attach the Palm Rest Ass'y.

SW PCB Ass'y
Match the edge
and attach it.
No direction when inserting
(Note) Arrow without specified measurement: 0 ~ 0.5 mm
PAD PWB
SW FPC LED(R) FPC
Power SW Cable
Operation
Sheet
Operation Tape
Power Cable Cushion
SW PCB
Insert
Insert
Insert
8 2mm
Back side
Wrap around the Cable.
PAD PWB ASSY
PAD MAIN FPC ASSY
PAD MAIN FPC Ass'y
0 1mm
0 1mm
PAD-Main FPC
Tape
Stiffening Plate Side
Fold back
Use the fixing JIG for stressed
parts when inserting.
Ensure the LED part does
not come off or run over.
Confirm the direction
when attaching.
CN bracket is on the
back side.
Confirm the direction when attaching.
Front side

SW PCB Ass'y

Screw Screw

Match to the upper left corner. 0 to 0.5mm
Release Paper
Release Paper
left LED PCB
right LED PCB
Connector(CN801)
Connector(CN806)