9-16
9.2.5. Assembling the Antenna Cover, the Tablet Latch Cover and the LCD Rear Case
1. Fix the LCD Rear Case using the 10 Screws <N15> and
the 2 Screws. <N16>
2. Attach the Antenna Covers and the Tablet Latch Cover to
the Display Unit.
3. Tighten the 8 Screws <N7> on the back of the Display
Unit.
4. Turn the Display Unit over, and tighten the 8 Screws.
<N7>
Screws <N7> : DRQT26+E5FKL
Screws <N15> : DXYN2+J6FNL
Screws <N16> : DXYN3+J10FNL
n Assembly of LCD Front Case
<N15>
<N15>
<N15>
<N15>
<N15>
<N16>
<N16>
<N15>
<N15>
<N15>
<N15>
<N15>
<N7>
<N7>
<N7>
<N7>
<N7>
<N7>
Antenna Cover
Tablet Latch Cover
LCD Rear Case
Antenna Cover
<N7>
<N7>
N4>
<N4>
<N7> <N7>
<N7>
<N7>
LCD Front Ass'y
Place this to the ribs.
0~0.5mm
Don't get onto a step. Don't get onto a step.
* Do not use if the protrusion such as painting lump exists around D5.
(Otherwise, the Touch Screen operations will be affected.)
Don't get into a LCD indication range.
Tape
Magnet
Magnet
Cushion
Attach and apply the load 30~40N (3.0~4.0 Kgf).
Match to the center to attach.±1mm
(Both top/bottom and right/left sides)
Attach this side to
the Cabinet after
attaching.