Specifications
General
Power supply | : DC 12 V (11 V – 16 V DC), test voltage |
| 14.4 V, negative ground |
Current consumption | : Less than 2.1 A |
| (CD mode; 0.5 W x 4 channels) |
Maximum power output | : 50 W x 4 channels (at 1 kHz), volume |
| control maximum |
Tone adjustment range | : Bass: ±12 dB at 100 Hz, |
| Treble: ±12 dB at 10 kHz |
Speaker impedance | : 4 – 8 |
: 2.5 V (CD mode, 1 kHz, 0 dB) | |
: 200 | |
Dimensions (W x H x D) | : 178 x 50 x 160 mm |
| {7 x 1 15/16 x 6 2/16} |
Weight | : 1.3 kg {2 lbs. 14 oz} |
Front AUX input |
|
Input impedance | : 10 k |
Allowable external input | : 2.0 V |
Connector | : 3.5 mm Stereo |
Disc Player
Sampling frequency | : 8 times oversampling |
DA converter | : 1 bit DAC System |
: Astigma | |
Light source | : Semiconductor laser |
Wave length | : 790 nm |
Frequency response | : 20 Hz – 20 kHz (±1 dB) |
Signal to noise ratio | : 96 dB |
Total harmonic distortion | : 0.01 % (1 kHz) |
Wow and flutter | : Below measurable limits |
Channel separation | : 75 dB |
FM Stereo Radio
Frequency range | : 87.9 MHz – 107.9 MHz |
Usable sensitivity | : 10.2 dBf. (0.9 µV, 75 ) |
50 dB quieting sensitivity | : 15.2 dBf. (1.6 µV, 75 ) |
Frequency response | : 30 Hz – 15 kHz (±3 dB) |
Alternate channel selectivity | : 75 dB |
Stereo separation | : 35 dB (1 kHz) |
Image rejection ratio | : 55 dB |
IF rejection ratio | : 100 dB |
Signal/noise ratio | : 62 dB |
AM Radio
Frequency range | : 530 kHz – 1 710 kHz |
Usable sensitivity | : 27 dB/µV (22 µV, S/N 20 dB) |
Above specifications comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 and 
1% THD+N Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 )
Notes:
•Specifications and design are subject to modification without notice due to improvements.
•Some figures and illustrations in this manual may be different from your product.
