CQ-C8803N
English
11
Notes:
¡Adjust the clock when “NO CT” appears on the dis-
play.
¡When a broadcast of FM Radio Data System is
received, the clock is put right automatically by the
Clock Time service. (apage 22)
1Press [MENU] to display the menu
display.
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
2Press []]or [[]to display the
DISPLAY menu.
3Press [{]to select “CLOCK ADJ”.
4Press [BAND] (SET) to confirm the
display.
5Adjust the setting value.
[[]
:
Adjusting minutes
[]]
:
Adjusting hours
[}]
:
Forward
[{]
:
Backward
6Press [BAND] (SET) to confirm the
adjustment.
7Press [MENU].
For using the remote control, hold down [SEL]
(MENU)for 2 sec. or more.
You may need to set the following depending on the
devices to be connected.

Using Subwoofer

¡Subwoofer level adjustment (apage 33)
¡Subwoofer low pass filter (apage 33)

Connecting an AV device (TV, VTR)

If you connect TV to AUX1 terminal, set the AUX1 setting
to TV.
1Press [SRC] (SOURCE) to select the
AUX1 mode. (apage 14)
2
Press [MENU] to display the menu display.
For using the remote control, hold down [MENU]
for 2 sec. or more.
3Press [BAND] (SET)to adjust.
: For connection of other than a TV (default)
: For connection of a TV
4Press [MENU] to confirm the adjust-
ment.
The following functions are activated when the Security
Function is ON. (a page34)
¡The security indicator lights up when removing the
face plate.
¡The alarm sounds and the message appears on the
screen to warn you to remove the face plate at ACC
off. (The above phenomenon occurs when the ACC
setting of the unit is set to ON at the ignition key is at
the ACC off position or when the ACC setting of the
unit is set to OFF at the power of the unit is off)
Security Indicator

Preparation

Security Function

Setting

For a ACC-equipped car, select ON. (apage 34) The
following functions are available. (default: off)
¡The power is turned on automatically when inserting a
disc.
¡The clock can be displayed even if the power is off.
(apage 15)
Caution
Be sure to select OFF when
your car has no ACC
position in the ignition
switch. Failure to do this
could cause the battery to
go dead.

ACC SettingClock adjustment Other Settings

OFF ACC
IGN