32 CQ-VW100U
31

EnglishEnglish

ID-Code
ID Code Setting
Prior to operating this unit, it is advisable to assign a 4-
digit ID code for security. Once the ID code has been set,
the unit cannot be operated if the main power supply is
disconnected then re-connected. It is electronically locked
so that a thief cannot use the stolen unit unless that per-
son knows the code you have set.
The ID code operation must be performed only by the
person to whom the unit belongs.
Generally, it is not necessary to enter the ID code each
time when using the unit if it has not been disconnected
from the main power supply (car battery).
to 4 digits numeric code
default: none
How to set your ID code (for the first time)
qEnter an 4 digit ID code.
wEnter the same 4 digit ID code again.
How to change your ID code
qEnter the preset (old) 4 digit ID code. If the wrong ID
code is entered, a new ID code cannot be registered.
wEnter a new 4 digit ID code.
eEnter the new 4 digit ID code again.
How to cancel the known ID code
qEnter the preset (old) 4 digit ID code. If the wrong ID
code is entered, it is not possible to cancel the ID code
function.
wTouch and hold until “Completed!” is displayed.
The ID code cancelling procedure is completed. The unit
now works without an ID code.
Note:
¡Should your unit ever require service, cancel your ID
code before sending for repair.
¡The ID code setting cannot be eliminated even by the
memory clear function.
¡The inputted code is not displayed for your security.
90
Settings (continued)
RadioDiscSoundScreen

Basic Setting

Clock
Clock setting
: clock display ON (“– –:– –” is displayed
before adjusting the clock.)
: clock display OFF
default:
: Forward
: Backward
Note:
¡To start the clock, touch .
¡Set the Daylight Saving Time manually.
default: Hour Adjust: AM 12
Minute Adjust: 0
{
}
(Clock adjustment)
Adjust
Off
Off
On
(Clock display)
Display
Caution
¡Record your registered ID code and keep it in a
secure location. (Fill in the ID code memo
(apage 42).) If you forget it, you will be unable
to use the unit. In case you forget the ID code,
please consult your nearest Panasonic
Servicenter.