Panasonic CQ-VX100W manual Balance/Fader

Basic Setting Screen Sound Disc Radio

Note:

¡The sound setting screen can be also activated by touch- ing Sound when the button is displayed. (a page 12)

SQ3

SQ3 setting

Six SQ presets are already provided at shipment in this unit.

Flat : flat frequency response

		English
Balance/Fader
		32
Balance/fader adjustment
	(Sound level adjustment
Balance
	between right and left speakers)
[ : right enhanced
] : left enhanced

Pop : wide-ranged and deep sound

Rock : speedy and heavy sound

Jazz : jazz-specific deep sound

Club : club and disco-specific sound

Vocal : clear sound

default: Flat

Fader

[ : front enhanced

] : rear enhanced

Setting range: Right 15 to Left 15 default: 0

(Sound level adjustment between front and rear speakers)

You may set your own SQ or modify factory presettings in each memories by following the instructions below:

Adjusting level of each preset

q Select the preset SQ that you prefer to adjust.

w Touch or to select a frequency in a fre- quency band (BASS/MID/TRE).

e Touch or to adjust each frequency.

Adjustable range: –12 dB to +12 dB

Adjustable frequency:

BASS;	60 Hz, 80 Hz, 100 Hz, 200 Hz
MID;	500 Hz, 1 kHz, 2 kHz, 3 kHz
TRE;	10 kHz, 12 kHz, 15 kHz, 18 kHz

Note:

¡The new level adjustment will overwrite the previous level adjustment.

¡For resuming the factory settings, touch and hold

Default for more than 2 seconds.

Setting range: Front 15 to Rear 15 default: 0

Audio setting with [VOL] (PUSH SEL) on the main unit

Audio settings of Bass , Treble , Balance and

Fader can be performed with [VOL] (PUSH SEL) on the main unit.

q Press [VOL] (PUSH SEL) to select a setting item.

(Regular mode)

d

Bass

d

Bass/Treble

Bass/treble adjustment

Bass

[ : more

] : less

Treble

[ : more

] : less

(Bass adjustment)

(Treble adjustment)

Setting range: –12 dB to +12 dB default: 0 dB

Treble

d

Balance

d

Fader

w Rotate [VOL] to make an adjustment.

CQ-VX100W

33