Panasonic CQ-VX100W manual Volume, Tilt Angle, Folding Down, Display Temporarily

General Operations (continued)

Operations

Volume		q Up
Note:	–
		w Down
¡The sound level for	w	q
each source is	Setting range: 0 to 40, default: 18
stored in memory.

Note:

¡The volume level can be set independently for each source and each disc format.

Mute			–	[MUTE]	Mutes the sound.
					To cancel, press again.
Tilt Angle			–	[TILT]	q Press and hold for more than 2 seconds.
			or		w Touch to adjust.
				–	Setting range: 1 to 5
						default: 5
				–	the monitor is opened automatically when turning ON ACC.
			Auto
				–	the monitor is not opened automatically.
			Manual
					default:
						Manual
			Warning
			¡Do not touch the unit while		the display is moving. Inserting hands, fingers or for-
	1	5	eign objects into the unit can cause injuries and damage to the unit.

Note:

¡Vertical angle (TILT) is saved in the memory, so when the display is drawn out next, it is automatically set at the angle and in the position adjusted before.

¡After adjusting its angle, also adjust the brightness as well. (a page 32)

¡The car model and installation conditions may impose some restrictions on the adjustment of the monitor's angle.

Folding Down the	–	[TILT]	To raise the display, press again.
Display Temporarily
	Note:
	¡Even when the unit power is off, you can fold down the display temporarily.

Caution

¡Avoid physical shock to the monitor.

¡Do not place any object on the display, or subject it to undue force. ¡Do not move the display forcibly.

¡The monitor movable range may be limited by the type of car, the position where the display is mounted, etc.

English

14

CQ-VX100W

15