❑Product Servicing
If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service Center. The product should be serv- iced only by a qualified technician.
❑Replacing the Fuse
Use fuses of the same specified rating (15 A). Using dif- ferent substitutes or fuses with higher rating, or connect- ing the product directly without a fuse, could cause fire or damage to this unit.
If the replacement fuse fails, contact your nearest Panasonic Service Center for service.
❑If the Unit Begins to
Malfunction...
Reset switch
Remove the face plate (a page 11) and insert a hard, slender stick into the hole and push the switch.
Important
Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.)
If the unit fails to return to normal condition, call the nearest Panasonic Service Center and ask for repairs.
TILT OPEN
English
40
AV1 IN |
Reset switch
Note:
¡If the
Maintenance
❑Cleaning this Unit
Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry soft cloth for routine exterior cleaning. Never use benzine, thinner or other sol- vents.
Alcoholl
PPesticidei i
ThinnerhinnerWax
BeBenzine
To remove stubborn stains
1Moisten the soft cloth in dishwashing
soap diluted with water and wring well.
2 Wipe lightly. Go over the same surface with a dry cloth.
Note:
¡Since there is the possibility of water drops getting inside of the unit, do not directly apply cleanser to the surface.
¡Do not scratch the screen with your nails or other hard objects. The resulting scratches or marks will obscure the images.
Caution
¡If water drops or similar wet substances get inside the monitor, it may cause a malfunction.
41
