REMOTE CONTROL OPERATION
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.
Default Modes For Remote Control
|
|
|
|
|
|
|
| Device |
| Operates |
| Default |
|
|
|
|
|
|
|
|
| TV |
| TV (Panasonic Only) |
| Panasonic TV Codes |
|
| VCR |
| VCR (Preset) |
| Panasonic VCR Codes |
|
| DBS |
| DBS (Preset) |
| Panasonic DBS Codes |
|
| CABLE |
| CABLE (Preset) |
| Panasonic DBS Codes |
|
| DVD |
| DVD, CD (Preset) |
| Panasonic DVD Codes |
|
|
|
|
|
|
|
|
Determine the manufacturer of the component and look in the table for the code.
Programming With a Code
Procedure
•Confirm that the external component is plugged in and operating.
•Turn the component off.
ACTION
• Press | and POWER together, for at least 5 seconds. |
•Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
•Enter the
•Press the Remote Control POWER to test the component. If the procedure was successful, the component will turn on.
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
•Confirm that the external component is plugged in and on.
•Turn the component off.
ACTION
• Press | and POWER together, for at least 5 seconds. |
•Press appropriate component button on the Remote Control.
• | Press VOL | to move forward to the next code. Press | VOL to move backward. |
• | Press the Remote Control POWER to test the component. If the procedure was successful, the component will turn on. | ||
Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code is found.
ACTION
• | After the code is found, press | to store the code. |
10λ
