REMOTE CONTROL OPERATION (MODELS
ENGLISH
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or without a code for the component.
Device | Operates | Default |
TV | TV (Panasonic Only) | Panasonic Code |
DBS/CBL | DBS STB & CBL STB (Preset) | Panasonic DBS Code |
VCR | VCR (Preset) | Panasonic Code |
DVD | DVD (Preset) | Panasonic Code |
Note: Determine the manufacturer of the component and look in the table for the code.
Programming with a Code
Procedure
•Confirm that the external component is plugged and operating.
•Turn the component off.
• Press | ACTION |
| together, for at least 5 |
and | POWER | ||
|
|
|
seconds.
•Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
•Enter the
• Press the Remote Control | POWER | to test the |
|
component. If the procedure was successful, the component will turnon.
Note: If the component does not operate with the Remote Control, repeat the procedure using another code. (Some brands have multiple codes). If an incorrect code is entered, or if the procedure takes longer than 30 seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
•Confirm that the external component is plugged in and on.
•Turn the component off.
ACTION
• | Press | and | POWER | together, for at least 5 |
|
|
|
|
seconds.
•Press appropriate component button on the Remote Control.
•Press VOL u to move forward to the next code. Press t VOL to move backward.
• | Press the Remote Control | POWER | to test the |
|
component. If the procedure was successful, the component will turn on.
Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code isfound.
|
| ACTION |
• | After the code is found, press | to store the |
| code. |
|
Component Codes
The Universal Remote Control is capable of operating many component brands after entering a code. Some components may not operate because the codes are not available due to limited memory. The Universal Remote Control does not control all features found in each model.
Write the code numbers from tables in this space. This will serve as a reference if you need to program your Remote Control.
VCR |
| CABLE |
| DVD | ||||||
|
|
|
|
|
|
|
|
|
|
|
DBS
12•
