Panasonic CT 34WX50 ASPECT Controls, Mode, Picture, Explanation, Panasonic, Auto, Normal, Zoom

ASPECT Controls

Mode

Picture

Explanation

The display will automatically become enlarged

4

16

Panasonic AUTO

(depending on the picture source), allowing you to view

the picture at its maximum size.

3

9

Note:

�

Image is expanded

(1) If Panasonic Auto mode is selected, the image may

Panasonic

For an elongated image

change size suddenly, according to program

4

AUTO

Changes in accordance

material.

with the Panasonic

(2) There may be a slight delay for the screen size to

3

AUTO mode setting

adjust. If a 480p or 1080i signal is input during

(Refer to page 24)

component input signal mode, the controls will not

For a 4:3 image

operate.

NORMAL will display a 4:3 picture at its standard 4:3

4

size.

NORMAL

NORMAL

3

ZOOM mode magnifies the central section of the picture.

4 16

ZOOM

ZOOM 3 9

4		16	FULL will display the picture at its maximum size but
			with sight elongation.
	FULL

FULL 3 9

						JUST mode will display a 4:3 picture at maximum size
	4			16
						but with aspect correction applied to the center of the
			JUST
JUST						screen so that elongation is only apparent at the left
		3			9	and right edges of the screen. The size of the picture
						will depend on the original signal.

Notes:

(1)The S-VIDEO terminal on this set can detect specially encoded signals that are compatible with a wide screen monitor. When a full image from the S-VIDEO terminal of specially encoded video is detected by the set, the screen size is automatically set to FULL mode.

(2)The screen size also changes if ID-1 is detected.

(3)The screen size will also change if S1 detection has been set.

25