5
PREPARATION BEFORE OPERATION
■Indoor Unit
1Connect the power supply cord to an independent
power supply
2Open the front panel
3Remove the air filters
4Fit the air purifying filters in place
5Insert the air filters
6Close the front panel
■Remote Control
–To set the current time
1Press 1.
2Then press 2 to increase or decrease the time.
3Press 1 again.
Set time at display will light up.
CHECK
AUTO
AUTOHEAT DRYFANCOOL
FAN
AUTO
RESETCLOCK
FAN SPEED
AIR SWING
OFF
CANCEL
ON
SET
123
TIMER
1
2
6
21
4
5
3
HOW TO OPERATE
■To start the operation
•Press 1.
•POWER indicator (green) on the indoor unit will light
up.
•To stop, press once more.
■Setting Mode
•Press 2 to select:-
AUTO –Automatic Operation
COOL –Cooling Operation
DRY –Soft Dry Operation
FAN –Air Circulation Operation
OFF
ON
HEATDRYFANCOOL
CHECK
TEMP
AUTO
AUT
UTO
FAN
AN
AUT
UTO
AUTUTO
RESETCLOCK
AIR SWING
OFF
CANCEL
123
TIMER
OFF/ON
POWERFUL
ECONOMY
SLEEP
ON
SET
FAN SPEED
MODE
2
3
51
6
4
■Setting Temperature
•Press 3 to increase or decrease the temperature.
•The temperature can be set between 60°F ~ 86°F.
•Recommended temperature:
•During AUTO Operation, press 3 to select:-
•Operation with 4°F higher than the standard
temperature.
•Operation with the standard temperature.
•Operation with 4°F lower than the standard
temperature.
●Standard Temperature
•Once the Automatic Operation is selected, the
indoor temperature sensor operates automatically
to select the desired operation mode with Cooling
or Soft Dry.
•After the operation mode has been selected, the
mode does not change.
Operation
Cooling
Soft Dry
Standard
temperature
77°F
72°F
Indoor
temperature
73°F
COOL
DRY
75°F ~ 78°F
2°F ~ 4°F
Lower than the
room temperature