ENGLISH
6
■Setting the Fan Speed
•Press 4 to select:-
FAN –Low Fan Speed
FAN –Medium Fan Speed
FAN –High Fan Speed
AUTO
FAN –Automatic Fan Speed
The speed of the indoor fan is adjusted
automatically according to the operation.
The indoor fan stops occasionally during
cooling operation.
■Setting the Vertical Airflow Direction
•Press 5 to select:-
•Swing up/down automatically.
■Setting the Horizontal Airflow Direction
•Press 6 to select:-
●Notes
•If the unit is not going to be used for an extended
period of time, turn off the main power supply. If it is
left at the ON position, approximately 2.5 W of
electricity will be used even if the indoor unit has been
turned off with the remote control.
•If operation is stopped, then restart immediately, the
unit will resume operation only after 3 minutes.
●Operation Details
COOL – Cooling Operation
•To set the room temperature at your preference
cooling comfort.
AUTO – Automatic Operation
•Sense indoor temperature to select the optimum
mode.
•Temperature is not displayed on the remote control
during AUTO operation.
DRY – Soft Dry Operation
•A very gentle Cooling Operation, prior to
dehumidification. It does not lower the room
temperature.
•During Soft Dry operation, the indoor fan operates at
Low fan speed.
FAN – Air Circulation Operation
•When the room temperature reaches the set
temperature, operation commences at Low airflow
volume. It stops when the room temperature drops to
4°F below the set temperature.
(It is useful when using a heater).
AUTO
•Swing left/right automatically.
AUTO
AUTO
AUTO
Horizontal
Airflow
Direction
Indoor
Unit
Remote
Control