Operation Details
AUTO - Automatic Operation•The unit will automatically select the operation mode according to the setting, outdoor and room temperature. During operation mode selection, power indicator blinks. For every 30 minutes, the operation mode is reselected.
HEAT - Heating Operation•Enables you to enjoy the warming effect at your preferred setting temperature.
•For cold air prevention, air might not blow out immediately and power indicator blinks when operation starts.
•Also operates in defrost mode (maximum 10 minutes) where by the power indicator blinks. The melted frost is drained at outdoor unit and indoor fan is stopped.
COOL - Cooling Operation•Enables you to enjoy the cooling effect at your preferred setting temperature.
DRY - Soft Dry Operation•Enables you to set the desired temperature at low fan speed which provides you with the dehumidifying surroundings.
HOW TO OPERATE
Auto,Heat,Cool,Dry
2
Select the desired operation.
AUTO
DRYHEAT
COOL
1
Start the operation.
3
Set the temperature. (16°C~30°C)
Supersonic air purifying device (super
Powerful, Quiet and Ion operations could be activated in all operation modes.
Press button again to stop the operation.
Hint
To save electricity, close the curtains when using air conditioner to prevent sunlight and heat from coming in.
Troubleshooting
The room has a peculiar odour.
Air conditioner does not cool or heat efficiently.
This may be a damp smell emitted by the wall, carpet, furniture or clothing in the room.
Ensure the temperature has been set correctly.
Ensure windows and doors have been closed properly.
Ensure filters are cleaned or replaced when necessary.
Ensure inlet and outlet vents of the units have not been obstructed.
46