Operation Details
TIMERHOW TO OPERATE
Timer
•Use the ON timer to turn on the air conditioner at the desired time. This will give you a cooling or warming environment, e.g. when you return from work or wake up.
•When the ON timer is set, operation will start up to 35 minutes before the actual set time.
•Use the OFF timer to stop the air conditioner operation at the desired time. This can save electricity while you are going out or sleeping.
•The set timer will repeat daily once it is set.
•If there is a power failure, you can press SET button to restore the previous setting once the power is resumed.
•If the timer is cancelled, you can restore the previous setting by pressing SET button.
CHECK•When there is error, the unit stops its operation and timer indicator blinks.
1. Press for 5 seconds.
2.Browse for respective error code, where “beep” sounds are heard.
3.Turn off the power supply and call authorized distributor.
Note:
Press the ‘Reset’ button to quit checking.
Unit might operate with limited function depending on error found.
1
Select ON or OFF timer.
CANCEL
Cancel the selected timer.
2
Set the desired time.
3
Confirm the setting.
(Operation starts, 4 “beep” sound is heard)
Ensure the clock on the remote control has been set correctly.
You could use the ON and OFF timers at the same time.
To cancel either the ON or OFF timer, press 
or 
, then press 
.
Hint
Press CLOCK more than 10 seconds to change the time format from 24 hours to AM/PM format.
For your convenience, you could set the air conditioner to operate automatically by using both ON and OFF timer.
Troubleshooting
TIMER indicator always on.
POWER indicator is blinking 35 minutes before ON timer is activated.
Timer is activated and the setting will repeat itself daily.
The unit is determining the operation mode by sensing the room temperature. This happens when it has been set to AUTO operation mode.
48
